ESWP: International Bridge Conference®: Exhibitors
List of Exhibitors (A-H)
AAA
Galvanizing
|
Contact: Scott Matalone |
Acrow
Corporation of America |
Contact: Eugene Sobecki Acrow is an industry leader in the design and manufacture of prefabricated
modular steel bridges. Acrow's principal business is the engineering,
manufacturing, and supply of Acrow Panel Bridges. We have been in
business for over 50 years. Acrow is based in North America with
representation in 35 countries. Visit http://www.acrowusa.com. |
|
BOOTH # 617 |
Contact: John Steib Advitam devotes itself to understanding the risks of deterioration for infrastructures and implements software solutions, inspection, maintenance and monitoring systems in order to ensure their durability and serviceability at lower cost. Advitam's activities include: research and development of innovative technologies, software development, on-site inspections, monitoring system integration and installation, measurements, risk and deterioration analysis, assessment of life-span, recommendations for repairs, maintenance and life-extension. |
|
BOOTH # 722 |
Contact: Kristen Jones |
|
BOOTH # 219 |
Contact: Torben Krebs American Arminox is proud to introduce a new grade of Duplex steel.
1.4362 (UNS2304) is a well known grade in the flat products range,
where it has successfully been used for many years. Its corrosion
resistance, combined with superior tensile values makes it suitable
for a range of applications in severe conditions. We are now introducing
this grade as reinforcement. 1.4362/UNS2304 will replace 1.4436
(316) and 1.4462/UNS2205 in our standard manufacturing program. |
American
Bridge Manufacturing |
Contact: Darko R. Jurkovic, PE American Bridge is a vertically integrated construction, engineering, and manufacturing firm with operations throughout the USA and abroad. The company is specialized in the general construction, manufacture, erection, and rehabilitation of complex bridges and other structures. The manufacturing arm of American Bridge is uniquely qualified in the fabrication of structural steel for various bridge designs including arch, truss, girder, beam and movable type bridges. Two modern fabrication facilities in Pennsylvania and Oregon serve North America’s bridge rehabilitation and new bridge markets.. |
American
Composites Manufacturers Association |
Contact: John P. Busel, Director, Composites Growth
Initiative ACMA is the world's largest trade association representing the composites industry and hosts the largest composites trade show in North America. The ACMA Transportation Structures Council operates to educate practitioners on FRP composites used in civil engineering / construction applications. Manufacturers products on display include structural profiles, bridge decks, pedestrian bridges, rebar, piling, and concrete repair/strengthening systems. More information at www.acmanet.org |
American
Galvanizers Association |
Contact: John Krzywicki Serving the needs of specifiers, architects, engineers, contractors, and fabricators throughout North America since 1935, the American Galvanizers Association (AGA) provides information on the most innovative applications and state-of-the-art technological developments in hot-dip galvanizing for corrosion protection. Created to educate and train in the specification and use of hot-dip galvanized steel, the AGA maintains a large technical library, distributes numerous industry publications, offers free educational seminars, and provides toll-free technical support to the specifying community. |
American Iron and Steel Institute
|
Contact: David A. Dock The AISI mission is to advance steel as the material of choice and to enhance the competitiveness of member companies and the North American steel industry. Our vision is a sustainable North American steel industry committed to manufacturing innovative products that answer society's needs. |
Amscot Structural Products Corp.
|
Contact: Robert Furchak AMSCOT Structural Products Corp., is an A.I.S.C. certified manufacture of Custom-engineered Hi-load Bridge Bearing assemblies; steel shim laminated elastomeric padss, HLMR Pot bearings, Bronze Rocker's and our advanced Uplift-Restraint-spherical slide bearing for seismic conditions. Our Bearings are revolutionart in the industry and in service for over 35 years. |
Applied
Foundation Testing |
Contact: Lea Smart Specializing in statnamic axial and lateral load testing, crosshole sonic logging (CSL), sonic integrity testing, video shaft inspection device, post grouted shafts, shaft inspection, dynamic pile testing, conventional load tests. |
|
BOOTH #411 |
Contact: Bill Villalpando Applied Geomechanics builds electrolytic tiltmeters and inclinometers
to monitor bridges, buildings, tunnels, dams, slopes, embankments
and countless other structures around the world---from the Leaning
Tower of Pisa to the Golden Gate Bridge. |
|
BOOTH #220 |
Contact: Dan Hoffman Atema ia a quality consulting, assessment and training firm serving
structural steel. The firm creates customized supplier certification
programs to state or projects specific provisions assisting DOTs
and engineering firms assess their supply chain. Atema also assists
fabricators and erectors meet requirements of national certification
programs like AISC, AWS, ISO. |
B&B Roadway, LLCBOOTH #109 |
Contact: Denise Lyon |
Bar
Splice Products, Inc. |
Contact: Gary R. Foster Manufacturer of mechanical splices for rebar. |
Barnhart
Crane & Rigging |
Contact: Will Smith Barnhart embodies the concept of “Mind over Matter”…Barnhart specializes in utilizing cutting edge technology to provide innovative, engineered, lifting and moving solutions for the bridge building industry. We truly believe in “Building it Big, Moving it Once”. Like our clients, you too will benefit from Barnhart’s innovative, cost saving ideas. |
| BASF Construction Chemicals, LLC BOOTH #608 |
Contact: Jan Aument |
BendTec,
Inc. |
Contact: Wendy Meierhoff BendTec, Inc is a LEADER in the bending, fabrication, design, and
engineering of large and small piping & structural steel for
structural & architectural applications. BendTec is AISC certified
in compliance with Simple Steel and Major Steel Bridges, Fracture
Critical Endorsement & Sophisticated Paint Coating Endorsement. |
|
BOOTH #401 & 403 |
Contact: Samantha Antonacci Bentley is a global provider of collaborative software solutions
for creating, managing and sharing architectural, engineering and
construction (AEC) content. Bentley offers engineering software
based on MicroStation®: GEOPAK® Rebar, concrete detailing/scheduling,
GEOPAK Bridge, object-oriented 3D bridge design and Bentley®
InRoads Bridge, geometric bridge modeling. Bentley also provides
a range of professional services. |
|
BOOTH #720 |
Contact: Dan Edwards |
|
BOOTH #121 |
Contact: Bill Gorse |
| Brayman Construction Corporation BOOTH #222 |
Contact: Thomas Puzniak Brayman is a full service provider of General and Specialty Geotechnical design/build solutions throughout the entire eastern United States. Capabilities include - bridges and complex structures, steel erection, lock and dam construction/repair, marine construction, demolition, excavation/drainage, specialty geotechnical solutions - micropiles, caisssons, driven/drilled piles, rock/soil nailing, ground anchors/tiebacks, grouting, underpinning and more. |
Bridge
design & engineering
magazine |
Contact: Liz Akers The leading magazine for the international bridge industry. Every
issue of Bd&e looks at the latest news, projects reports, interviews
and technical & application features from around the world.
Bd&e is essential reading for anyone who finances, plans, designs,
builds, maintains, operates, or owns bridges. |
Bridge
Grid Manufacturers Association (BGFMA) |
Contact: Mark Kaczinski |
Bridon |
Contact: Barrie Mordue Bridon specialises in providing architects and designers with cable solutions which enable the most ambitious designs to be realised. As aesthetics become increasingly important, Bridon has been leading the way by developing the stylite range of cable systems. Bridon cable systems combine a century of manufacturing experience, proven technological expertise and cutting edge design to provide the bridge industry with a complete range of products from ultra high strength bridge wire to full locked coil cable systems. |
Bureau
Veritas |
Contact: John Spires, Jr., PE Bureau Veritas helps clients comply with standards and regulations relating to Quality, Health and Safety, Environment and Social Responsibility. We can assist with clients' Quality Assurance needs during manufacture, fabrication and erection of industrial materials, engineered products, machinery and civil structures. Bureau Veritas provides inspection, testing, auditing, certification and training. |
Burgess
& Niple, Inc. |
Contact: Raymond H. Stokes, Jr. Burgess & Niple is a long-standing leader in bridge engineering
services. Our expertise includes design, inspection and structure
health monitoring. We integrate technology and aesthetics to deliver
high-quality, landmark bridges. As pioneers in applying rock-climbing
techniques for hands-on, structural inspections, we have improved
safety and saved our clients millions of dollars. |
Campbell
Scientific, Inc. |
Contact: Ken Stevens Campbell Scientific, Inc. manufactures data acquisition systems
for bridge monitoring and testing. Proven on many of the world's
premier bridges, our rugged, stand-alone, DC powered instrumentation
features multiple telemetry options, low power use, non-volatile
data storage, rainflow histograms, real-time FFTs, and rugged reliability
even in harsh, remote environments. |
Cargill
— SafeLane |
Contact: Bob Persichetti SafeLane Surface Overlay system is a patented polymer pavement overlay that reduces ice of frost formation on its surface while protecting infrastructure from corrosion and chloride intrusion. A polymer expoxy is mixed with aggregate and applied to pavement surfaces. This aggregate has the unique ability to store deicing liquids and releases them when weather conditions demand it. The result is safer, more durable roads and bridges that are easier to maintain. |
Carolina
Stalite Company |
Contact: Dr. Reid W. Castrodale, PE Stalite is a high performance lightweight aggregate manufactured
by expanding slate in a rotary kiln at high temperatures. Lightweight
concrete produced using Stalite has reduced density that improves
structural efficiency and reduces handling costs for precast elements,
enhanced durability and design compressive strengths of 10,000 psi
or more. |
| CETCO
Construction Drilling Products |
Contact: Justin Seago CETCO Construction Drilling Products, a manufacturer of bentonite
and supplier of Shore Pac polymer slurry and additives. The industry's
best combination of applied polymer technology and bentonite for
Foundation Drilling, and slurry wall construction. Cetco provides
the highest quality polymer and bentonite products available. |
Chase
Construction Products |
Contact: Doug Zuberer Chase Construction Products manufactures custom fabricated products
to meet the construction industry's ever changing requirements for
water, corrosion and wear protection. Chase is a technically supported
and quality assured resource for waterproofing sealants, expansion
joint systems and accessories. Our Capital Services, E-poxy Engineered
Materials and Royston brands of innovative products have been specified
for use on major projects in the transportation, industrial and
architectural markets. |
ChemCo
Systems |
Contact: John Bors Epoxy Asphalt by ChemCo Systems has a 35-year history as a bridge
deck surfacing. Most common applications are: 1) as thin overlays
(3/4 to 2 inch thickness) for a lightweight wear course and 2) as
a paving surface for orthotropic steel decks where toughness and
elastic composite behavior are critical. |
Clark
Testing Group |
Contact: Tom Hull Clark Testing Group is comprised of three diverse testing laboratories working in the development of Structural Health Monitoring Systems for bridges: Clark Dynamic Test Laboratory, Inc. and Clark Testing Services, LLC provide dynamic testing expertise with instrumented monitoring through field data acquisition, structures (stress/fatigue analysis), vibration, seismic, high impact shock, and environmental aging services; Clark Laboratories, LLC provides analytical chemistry support services to the groups' SHM systems projects.
|
Clodfelter
Bridge & Structures Int'l, Inc. (CBSI) |
Contact: Jerry V. Clodfelter CBSI is the definitive resource for engineering matters relating to cable-supported structures. In addition to consulting services, CBSI personnel design, contract for, storehouse, and supply both custom and standard bridge strands, ropes and related structural sockets, casting and forgings. We are driven by a determination to provide each client with the finest products and services available today. We know the excellence of our work is our most important asset. |
Computers
& Structures, Inc. |
Contact: Asif Habibullah Software solutions for structural and earthquake engineering for
bridges and other structures; bridge templates for generating bridge
models, automated bridge live load analysis, design with influence
lines at surfaces; segmental bridge construction analysis (including
creep and shrinkage), post-tensioned concrete box girder design,
cable supported/stayed bridge analysis, base isolation and pushover
analysis features. |
Consolidated
Systems, Inc. |
Contact: Jonathan Causey With 50 years of service to the construction industry, the Csi - Metal Dek Group™ designs and manufactures various Bridge Dek™ profiles that can accommodate design spans ranging from 18" to over 13'. Csi offers permanent forming systems that can be utilized in both non-aggressive and extremely aggressive environments. Csi sales, engineering, and project management personnel work collectively to provide Engineered Solutions™ for its customers. |
CONTECH
Bridge Solutions, Inc. |
Contact: Shirley Cultice CONTECH Bridge Solutions offers a comprehensive line of vehicular
and pedestrian bridge products to suit any application need. A variety
of plate, precast and truss products include CONTECH Structural
Plate, CON/SPAN Bridge System, the BEBO Arch System, Steadfast Bridges
and Continental Bridge. More then 65,000 structures are installed
worldwide. |
|
BOOTH #723
|
Contact: Dan McLean Supplier of Geo-Support Systems such as tie down/back anchors, soil nails, and micropiles using strand, solid bar, hollow Injection Bore (IBO) Titan Bar, and composite fiberglass tendons. Also supplies stressing and grouting equipment, permanent load monitoring instrumentation, as well as providing technical assistances to all our customers. |
Corrpro
Companies, Inc. |
Contact: Clem Firlotte, PE Corrpro offers complete cathodic protection and coating services to protect your structures, whether steel or concrete, from corrosion. |
CTLGroup |
Contact: Adrian Ciolko CTLGroup provides engineering, construction technology consulting, and testing solutions. Refined diagnostic tools and laboratory resources enable CTLGroup to:
|
Cyro
/ Evonik Industries |
Contact: Eric Humphries CYRO/Evonik Industries offers transparent PARAGLAS SOUNDSTOP Noise Barrier Sheet, the aesthetic solution for noise control. PARAGLAS SOUNDSTOP TL-4 System is a lightweight safety / noise barrier system for bridges and elevated roadway applications. It has been successfully tested under NCHRP 350 Test Level 4 conditions and has been approved for use as an attachment to a crashworthy barrier by the FHWA. CYRO Industries is a wholly-owned subsidiary of Evonik Degussa Corporation. |
The
D.S. Brown Company |
Contact: Bob Rose Design and manufacture engineered bridge construction materials including expansion joint systems, structural bearing assemblies (elastomeric, HLMR and spherical), Cableguard™ elastomeric wrap (corrosion protection for bridge cables), FRP (Fiber Reinforced Polymers) and Exodermic™ (composite, unfilled steel grid) Bridge Decks. |
D'Appolonia |
Contact: Dave Leitze D'Appolonia provides civil, geotechnical and environmental engineering analysis and design services for infrastructure and transportation systems. The firm's areas of specialization include foundations, earth retention and excavation support structures, slope stabilization, ground improvement, subsidence mitigation, dewatering, instrumentation, geophysical reconnaissance and LRFD training for highway bridge substructures. |
|
BOOTH# 709 |
Contact: Thomas C. Rowader, PE Dawood is a multi-disciplined consulting firm offering services
to the public and private setor including civil/municipal, structural,
highway, geotechnical, environmental, surveying, land/site development,
and planning services. |
DeAngelo
Brothers, Inc. |
Contact: Fred Grant We are your resource for industrial service solutions for federal, state and local governments, DOT's, railroads and industries throughout North America. Our Cleaning Management services include bridge cleaning, street sweeping, graffiti removal, tunnel washing and high-pressure cleaning. We also provide total Asset Management for contracts which include multiple maintenance services. |
Deery
American Corporation |
Contact: Wally Smith Manufacturer and Distributor of the FlexAble Bridge Joint System, mastic deck repair products in black or gray, waterproofing membranes and crack and joint sealants. |
|
BOOTH #607 |
|
DMJM
Harris |
Contact: Norma E. Rowley DMJM Harris is a full-service engineering firm with offices in
Pittsburgh, Philadelphia, Horsham and Harrisburg, PA, as well as
in 25 other states. DMJM Harris offers professional services in
Highway Design, Structural Engineering, NBIS and Structural Inspection,
Traffic Studies and Engineering, Planning, ITS Design, Electrified
Railroad Design, Mass Transit Systems Design, Program Management,
Construction Management and Construction Inspection. |
Dynamic
Surface Applications |
Contact: Mike Stachowicz Dynamic Surface Applications, Ltd (DSA) is the manufacturer of the Thorma-Joint® asphaltic plug joint system and the installer of a variety of maintenance and safety products including Thorma-Joint and the Imprint® surfacing system. |
Dywidag-Systems International (DSI) BOOTH #102 |
Contact: Mark Milici DSI will be exhibiting our range of Bar and Multi-Strand Post-tensioning
Systems together with information on Stay Cables. |
Earthquake Protection Systems, Inc. BOOTH #15a |
Contact: Anoop Mokha Earthquake Protection Systems is the world's leading manufacturer of seismic isolation bearings. Our Friction Pendulum bearings are used in the world's largest and most critical seismic isolation applications. The new Triple Pendulum bearing provides the best seismic performance available in seismic isolation at a lower installed cost. |
Enerpac |
Contact: Roberta Moring Enerpac, the global leader in high force hydraulic solutions, is exhibiting integrated systems for bridge building and rehabilitation. Whether you are constructing a signature bridge across a deep valley or lifting a national landmark for seismic retrofit, we will supply the high-force hydraulic solutions you need. Enerpac's broad line of standard and customized products offers the benefits of safety and efficiency to applications where high forces are required to get the job done. |
ERICO |
Contact: Lou Colarusso ERICO is a leading designer, manufacturer and marketer of precision-engineered specialty metal products serving global niche product markets in a diverse range of electrical, construction, utility and rail applications. LENTCON: Rebar splicing systems and other reinforcing products utilized to connect steel reinforcement rods in concrete. |
Eriksson
Technologies, Inc. |
Contact: Cathy Shoemaker Eriksson Technologies develops, markets, and supports bridge design software for the AASHTO LRFD and AASHTO Standard Specifications. Eriksson also offers technical training, engineering consulting services, and technical publications, and is the underwriter and maintainer of LRFD.com. |
| Euclid
Chemical Company BOOTH #9 |
Contact: Steve Scarpinato The Euclid Chemical Company is a leading manufacturer of polymer
bridge deck overlay systems, epoxy adhesives and coatings, concrete
and masonry ad mixtures, curving and sealing compounds, cementitious
and epoxy grouts, joint fillers and sealants, as well as a complete
line of concrete repair and restoration materials. These products
are available world wide. |
Figg
Engineering Group |
Contact: W. Jay Rohleder, Jr., PE, SE The FIGG Team is exclusively focused on the design, construction engineering and inspection of major bridges across America, creating landmarks and enhancing communities in which those bridges are located. FIGG's Bridge Design Charette process encourages public involvement in the design, building consensus as participants vote for elements of the design. FIGG-designed bridges have been honored with 253 awards for aesthetics, innovation and efficiency. The FIGG Team's passion is creating bridges as art, through visions inspired by owners and communities. |
The
Fort Miller Company, Inc. |
Contact: Scott Harrigan The Fort Miller Co., Inc., a Northeastern United States Based precast concrete company, manufacturers a broad spectrum of precast concrete products for the transportation industry. This includes such bridge related products as precast concrete box culverts, both three and four sided, bridge deck panels, pier caps, parapets, piers and segmental box girders. It also includes concrete and steel composite products such as Precast Concrete Steel Composite Superstructure Units (formerly Inverset) and light-weight bolt-down Effideck units. |
FreeSpan
Systems, Inc. |
Contact: Michael Swalling FreeSpan Systems, Inc. provides design/build services for construction of ultra long span light duty bridges throughout North America. |
|
BOOTH #605 |
Contact: Andrew Micklus Freyssinet, a world wide leader in specialty construction techniques,
is well known for prestressing and stay cable expertise. Freyssinet
Systems are state of the art offering reliable performance, high
quality and adaptability for bridges, buildings, storage facilities
& floating structures. Freyssinet also provides complete structural
repair and upgrading services. |
Geotechnics,
Inc. |
Contact: Randy O'Rourke Geotechnics is an independent accredited laboratory that is nationally
recognized for providing high quality geotechnical and geosynthetic
testing services. Geotechnics has been accredited by The Geosynthetics
Accrediitation Institute-Laboratory Accreditation Program (GAI-LAP).
The American Association of State Highway and Transportation Officials
(AASHTO) and The United States Army Corps of Engineers (COE). Geotechnics
has operations in Pittsburgh, Pennsylvania and Raleigh, North Carolina. |
Gerdau
Ameristeel |
Contact: Andy Marquardt Major steel producer in the United States. Also major fabricator
and coating operations for concrete reinforcing steel in North America. |
Greenman-Pedersen,
Inc. / SG Pinney Instrument Sales, Inc. |
Contact: Pat Marazzi Greenman-Pedersen, Inc. is a top national engineering/architectural design and construction firm involved on major projects throughout the IT S. and overseas since 1966. Provides many multi-discipline services to various Greenman-Pedersen, Inc. is a top national engineering/architectural design and construction firm involved on major projects throughout the U.S. and overseas since 1966. Provides many multi-discipline services to various Greenman-Pedersen, Inc. is a top national engineering/architectural design and construction firm involved on major projects throughout the U.S. and overseas since 1966. Provides many multi-discipline services to various industries. Instrument Sales, Inc. a GPI Company specializes in corrosion instruments and other equipment plus safety equipment. Underwater Engineering Services a GPI Company specializes in power plant maintenance and marine construction. Acquired in. 2006 CCC&L a (new) GPI Company specializes in expert witness testimony, coating conditions survey, including a full service laboratory. |
|
BOOTH #116 |
Contact: Thomas Piotrowski Since the design of the Benjamin Franklin Bridge in the early 1900's
by founder Paul Phillippe Cret, H2L2 Architects/Planners, LLC has
provided Bridge Design services for a comprehensive range of projects,
most recently, the Frederick Douglas-Susan B. Anthony Memorial Bridge
(Troup-Howell Bridge) in New York, and the Royal Park Bridge in
Florida. |
Harcon
Corporation |
Contact: Harry Stoltzfus Harcon Corporation provides bridge access equipment and rigging
services to consultants performing bridge inspections and contractors
performing bridge maintenance. Our focus is on eliminating lane
closures. Since 1988 we've provided our services on thousands of
structures all over the eastern half of the United States. |
Hardesty
& Hanover, LLP |
Contact: Hank C. Pokigo Hardesty & Hanover, a world renowned bridge engineering firm,
boasts 120 years of experience in engineering enduring structures.
From conceptual design through construction inspection, Hardesty
& Hanover projects include major bridges, highways, expressways,
and heavy movable structures. We offer clients great customer service
and projects that end on-time and under budget. |
Hatch
Mott MacDonald |
Contact: Tom Jaworski Hatch Mott MacDonald is an award winning full service consulting
engineering firm offering public and private clients multi-disciplined
expertise and comprehensive capabilities in planning, environmental
assessments, studies and analysis, design, architecture, procurement,
construction engineering and inspection, project, program and construction
management and facility maintenance and operations in the fields
of bridges, highways, rail/transit, tunnels, aviation/airports,
water conveyance, wastewater/cso, environmental, gas pipelines,
building and utilities. |
Hilman
Rollers |
Contact: Jeff Hill Hilman Rollers are an essential component for bridge construction projects. Whether used in the casting yard, built into segment launching equipment, moving entire bridge spans, or placing large castings - whatever the heavy load moving task - Hilman Rollers are the right tool to get the job done quickly, efficiently, and safely. |
Houston
Structures |
Contact: Mike Ulven Houston Structures Incorporated is a supplier of specialty forged,
cast, machined and fabricated structural support products for the
infrastructure industry. Located in Oregon, Houston Structures products
supplied include open and closed wire rope and strand sockets, wire
rope and strand assemblies, open and closed bridge sockets, anchor
sockets, turnbuckles, and specialized cable castings and forgings. |
HRV
Conformance Verification Associates, Inc. |
Contact: H. Rochelle Stachel HRV provides a comprehensive range of services worldwide in material/construction inspection, including steel, concrete, coatings, mechanical, and electrical. Serving the public and private sector, HRV is a leader in quality assurance, engineering consulting and expediting for the bridge/highway, water/wastewater, power, pressure vessel and commercial construction markets. |
|
BOOTH #19a |
Contact: Edward Liberati Hydro-Technologies, Inc. is the most experienced hydrodemolition
company in North America. Our expertise is the selective removal
of reinforced concrete using computer-controlled “high pressure
water jet” robots. Our company specializes in the rehabilitation
of the following type’s reinforced concrete structures: Bridges,
Parking garages, Tunnels, Plants, Dams. We understand what is important
to the Owners and Contractors. Bridge deck preservation is necessary
to keep our nation’s roadway system in service. We have developed
the Fast Track Hydro-Demolition Bridge Deck Overlay Method™
which is used by many Highway Departments and Contractor’s
as the fastest and most economical construction method to repair
and preserve bridge decks. The service life of bridge decks are
extended by 25 years when this method is used with minimum disruption
to traffic. |
This page was last modified:
